Our basic rebuild consists of the following:
-Complete tear down and evaluation of all components.
-Ultrasonic cleaning and soda blasting of all components.
-Throttle blades adjusted for a full 90° opening.
-Primary throttle shaft bushings installed.
-New electric choke housing.
-Upgraded primary jets and metering rods.
-Upgraded power piston spring.
-APT screw grooved for adjusting using a flat blade screw driver
-APT plug removed and 1/8" NPT, screw in plug, installed.
-New secondary air valve spring and cam installed.
-Secondary air valve adjusted for full opening.
-Secondary air valve blades notched at fuel opening for better fuel response.
-New needle and seat.
-New fuel filter.
-New accelerator pump.
-All seals and gaskets are rated for today's Ethanol blended fuels.
Additional cost for any broken or missing components.
1980 Rebuilds start at $375.00 (+ shipping) TTA-014
1981 Rebuilds (includes a new throttle position sensor)
start at $425.00 (+ shipping) TTA-014
To avoid any damage during shipping of your carb, I recommend the following....
1. Remove the air cleaner stud, rear vacuum tree and idle solenoid (in front of the linkage) and keep them with you. I do not need those items and it will make it easier to package.
2. Find a large enough box that leaves plenty of space around the top, bottom and sides of the carb.
3. Take paper grocery bags or lots of heavy paper and line the bottom of the box and tightly package the carb in the box making sure no part of the carb can come in contact with any sides of the box. The carb is heavy and the shippers do not handle them carefully. If the box gets tossed around, parts of the carb can come in contact with the sides of the box and can damage the carb. Do not use any type of plastic air cushions or bubble wrap as the weight of the carb will pop any bubble wrap or air bags and the carb can be damaged during shipping.
4. You can ship it to the address on our website
8530 12th Place
Kenosha, WI 53144
Lead times vary. Please contact us for lead time to have your carburetor rebuilt.
TTA Performance is now offering carburetor rebuilding for your 1980 or 1981 Turbo 4.9.